You can print up to 99 copies of the displayed label by entering the number of copies you need in the box just above the "Print" button.

Aligning Text

Should the text print in the incorrect position (ie. text being printed on lines or off the label), there is a calibration setting that will adjust the location of printing.

Note: Before adjusting the location of the priting, be sure the labels are being cut correctly. If they are not being cut in the gaps, you may have to reset the printer.

To adjust the printing of the text on the label, go to Options >>> Calibration in the DuraLabel PRO 300 Arc Flash Software.  Two controls are provided: one adjusts horizontal alignment; the other adjusts vertical alignment.

When you click on the "Save Settings" button, the window will close and the text alignment settings will be saved.