DuraLabel PRO Self-Laminating
Wire Wrap Labels

Wire wraps have an opaque white section and a clear tail. The white section is applied to the wire or cable and the "tail" is wrapped around it to cover and protect the printing on the label. Wire wraps may be applied to wire and cables that have already been terminated.

Wire wraps are available in three sizes, specified based on the size of the opaque area on the label. The available sizes are:
4" x 1.5", 4" x 1", 3" x 1", 2" x 1.5", 2" x 1", 1" x 0.5" and 1" x 0.25".

Easy-To-Use: Apply the wire wrap label to the wire or cable to be marked.

Self-Laminating: Wrap the clear "tail" around the wire or cable so that it covers (and protects) the label.

Finished! The wire or cable is marked in just a few seconds.

Wire Wraps are available for a wide variety of
wire and cable sizes.

In most cases these labels meet
EIA-TIA-606, BS EN ISO 60950,
FAA AC 43, 13A, and other codes
and standards.

Here are suggested wire wrap label
sizes for a few common wires and cables:

Wire/Cable	Label Size*
zipcord ("lampcord")	1" x 1/4"
RG59 coaxial cable	1" x 1/2"
Category 5, 4 pair, twisted pair cable	1" x 1/2"
Category 3, 25 pair cable	2" x 1"

*DuraLabel wire wraps are available
in sizes up to 4" x 1-1/2".

Shrink tubes are also available for the DuraLabel printer.
Please give us a call for more information about DuraLabel wire and
cable labels, or to place an order.

DuraLabel PRO Self-Laminating Wire Wrap Labels

Wire Wraps are available for a wide variety of wire and cable sizes.

DuraLabel PRO Self-Laminating
Wire Wrap Labels

Wire Wraps are available for a wide variety of
wire and cable sizes.